Dynamic EFI
Bringing TBI
and Multi Port Fuel Injection to a New Level.
Purchase Information
Dealers:
Applied GMC
Fremont, CA 94538
The Auto Shop
Tipton, Iowa 52772
For tuning and/or installation of ECM into vehicle:
Creative Fuel
Injection is carrying the EBL Flash
For our friends in Sweden,
Norway, and Finland please visit:
General information when
purchasing directly from Dynamic EFI:
If
shipped to a Pennsylvania address will need to add the 6% sales
tax on products & service (such as:
EBL/install/ECM/switcher/TT-1).
For shipments to the lower 48 UPS ground is used. UPS 2-day is
available for an extra charge.
For
overseas and Canada we use US Postal Service (USPS) Express Mail or
Priority Mail International. Contact us for overseas shipping cost. We
do
international shipments.
For payment several options are available:
PayPal
Money
Order (MO), may be obtained at a post office (USPS)
Bank,
or Cashiers check
Remember to
include a ship to address and an ECM if you wish to have yours
converted. No personal checks please. Questions
or notification that you have sent funds email to:
Here
is
Dynamic EFI's address for snail-mail and to
ship ECM(s) for conversion:
Dynamic EFI
463 5th Street
Phoenixville PA 19460
Dynamic EFI is a PayPal verified merchant:
Purchasing an EBL system via PayPal is fast and easy. Log into
PayPal with your email address and password. Then click on the Send
Money tab.
Use our PayPal email as the recipient:
bobr@dynamicefi.com
In the memo box enter a short note with the order information. That's
it. When the order has been received and when the
product
is promptly shipped an email
will be sent. The latter containing the tracking information
Note: please
double
check the ship-to address you have with PayPal. If you have
moved
please change your address with PayPal. When ordering via PayPal we
will ship to the address that PayPal provides. Make sure that they have
your correct ship-to address!
Product Purchasing Information
Shipping:
Shipping
is straight forward. For UPS ground to the lower 48 it is a basic $10
charge. This is true for a single EBL Flash self install or a complete
EBL Flash including an ECM. If a TT-1 WB and/or USB to Serial Adapter
is included, it is still $10 for UPS ground (lower 48). Same for UPS
2-day, a basic $35 charge. Note that many areas of the East coast are
only one or two days when shipped ground.
For overseas and Canada the charge will be what USPS charges. Please
email for what your shipping cost will be.
4
Injector Upgrade:
The 4 injector driver
upgrade is $75US. With this your ECM can
properly drive 4 TBI injectors, or 8 peak and hold (PnH) port injectors.
Return shipping UPS ground for the lower 48 is $10. UPS two day for the
lower 48 is $35.
The upgrade is a modification to the ECM. Please ship your ECM to
Dynamic EFI for conversion. Your ECM will be promptly converted and
returned.
Note: this upgrade is for the TBI ECMs and PCMs, not for the P4 ECMs
('7730, etc.).
Port Mod:
For those
that want to use an EBL Flash setup
with their high performance multi-port injection can now have the
injectors
firing in batch mode. The Port Mod changes the injector firing
to once per engine revolution and is
available for either a 6 or 8 cylinder engine. Currently the
installation of
this modification needs to be done here at Dynamic EFI. It is a small
1" x 1" PCB that is installed into the ECM.
The
Port Mod option is only available in conjunction with the EBL
Flash and is priced at $25 US (includes installation).
Note: this upgrade is for the TBI ECMs, not for the P4 ECMs ('7730,
etc.) which already do MPFI.
EBL Flash:
There
are three basic options for the Embedded Lockers Flash system.
This has
to do with the installation of the EBL board into the ECM.
All options
include the EBL Flash board, What's Up
Display, communication cable, documentation,
and calibrations.
The
self install is $350US. This is the EBL Flash board, calibrations. (BIN),
What's
Up Display, ECU/XDF, cable, and
documentation. Will need decent soldering skills
to do the self install (see install guide).
For us to install into an ECM is $30US.
For an ECM to be supplied it is $50US, then $30US for the install
($80US
total).
Totals for various options:
- Self
install: $360US (350 + 10 ship UPS ground)
- Self
install w/2-day air: $385US (350 + 35 ship UPS 2-day)
- We
install in your ECM: $390US (350 + 30 install + 10 ship UPS ground)
- Ready
to go EBL Flash ECM: $440US (350 + 50 ecm + 30 install + 10
ship UPS ground)
- Ready
to go EBL Flash ECM w/2-day
air: $465US (350 + 50 ecm + 30
install + 35 ship UPS 2-day)
Note
that the
4-injector upgrade and Port Mod are also available for use with the EBL
Flash.
EBL P4 Flash:
There
are three basic options for the Embedded Lockers P4 Flash system.
This has
to do with the installation of the EBL P4 board into the ECM.
All options
include the EBL P4 Flash board, What's Up
Display, communication cable, documentation,
and calibrations.
The
self install is $450US. This is the EBL P4 Flash board, calibrations (BIN),
What's
Up Display, ECU/XDF, cable, and
documentation. Will need decent soldering skills
to do the self install (see P4 install guide).
For us to install into an ECM is $20US.
You may purchase an ECM from us for $50US. This will be the 1227730 ECM.
Totals for various options:
- Self
install: $460US (450 + 10 ship UPS ground)
- Self
install w/2-day air: $485US (450 + 35 ship
UPS 2-day)
- We
install in your ECM: $480US (450 + 20
install + 10 ship UPS ground)
- Ready
to go EBL P4 Flash ECM: $530US (450 + 50 ecm
+ 20 install + 10
ship UPS ground)
- Ready
to go EBL P4 Flash ECM w/2-day
air: $555US (450 + 50 ecm
+ 20
install + 35 ship UPS 2-day)
EBL SFI-6 Flash:
There
are three basic options for the Embedded Lockers SFI-6 Flash system.
This has
to do with the installation of the EBL SFI-6 board into the ECM.
All options
include the EBL SFI-6 Flash board, What's Up
Display, communication cable, documentation,
and calibrations.
The
self install is $450US. This is the EBL SFI-6 Flash board, calibrations (BIN),
What's
Up Display, ECU/XDF, cable, and
documentation. Will need decent soldering skills
to do the self install (see P4/SFI-6 install guide).
For us to install into an ECM is $20US.
You may purchase an ECM from us for $50US. This will be the 1228253 ECM.
Totals for various options:
- Self
install: $460US (450 + 10 ship UPS ground)
- Self
install w/2-day air: $485US (450 + 35 ship
UPS 2-day)
- We
install in your ECM: $480US (450 + 20
install + 10 ship UPS ground)
- Ready
to go EBL SFI-6 Flash ECM: $530US (450 + 50 ecm
+ 20 install + 10
ship UPS ground)
- Ready
to go EBL SFi-6 Flash ECM w/2-day
air: $555US (450 + 50 ecm
+ 20
install + 35 ship UPS 2-day)
USB to Serial Adapter:
When
purchased with an EBL Flash system the USB to Serial Adapter cable is
priced at $25US.
The
USB to Serial Adapter cable is priced at $30US plus ship.
- If
purchased with an EBL Flash or TT-1 there is no additional
shipping charge
- If
purchased separately the shipping is $10 UPS for ground and
$25 for UPS 2-day air
TT-1 WB Controller:
The
TT-1 WB Controller is priced at $189US plus ship.
- If
purchased with an EBL Flash there is no additional shipping charge
- TT-1
with UPS ground: $199US (189 + 10 ship)
- TT-1 with
UPS 2-day air:
$224US (189 + 35 ship)
Copyright 2006-2013 Dynamic
EFI, All Rights Reserved.
No part
of this document may
reproduced in any form or posted on a web site without
expressed documented permission from Dynamic EFI