and Multi Port Fuel Injection to a New Level.
Price: $65 US
Switcher is used to change EBL Flash banks
without a laptop. You can switch between eight different calibrations
seamlessly. Select which bank to run via the rotary switch and press the small
button on the right. The LCD displays the current calibration bank.
Note: only for use with the EBL Flash ECM. It will not work on the EBL P4 Flash ECM.
The Flash Switcher
- Lighter cord for power
- Jack on bottom (next to power cord) accepts the cable supplied with the EBL Flash
- Switch seamlessly between up to eight calibrations
- LCD displays the current flash bank (calibration)
- Industrial temperature range specified
Large 1/2" tall digit is easy to read.
Note: only for use with the Dynamic EFI EBL Flash ECM. Will not work on any other ECM.
Copyright 2006-2013 Dynamic
EFI, All Rights Reserved.
of this document may
reproduced in any form or posted on a web site without
expressed documented permission from Dynamic EFI