Dynamic EFI

Bringing TBI and Multi Port Fuel Injection to a New Level.



Connection Drawings

Note: these drawings are Copyright Dynamic EFI and are not to be posted on any other web site. They are for use by users of the Embedded Lockers system.

The following four drawings are the basic wiring for an EBL ECM. Following those are detailed drawings for fan, shift light, 4-injector (C3 ECMs only), and N2O setups.

Sheet 1 of 4 for EBL wiring

Sheet 2 of 4 for EBL wiring

Sheet 3 of 4 for EBL wiring

Sheet 4 of 4 for EBL wiring


Detailed Drawings of Various Functions...

Fan Connection:

Fan wiring


Shift Light Connection:

Shift Light wiring


N2O Connection:

N2O Wiring


4-Injector Connection (Note: for TBI ECMs only. Not for PCMs):

4-injector wiring


Home | EBL FlashEBL P4 Flash | EBL SFI-6 Flash | Buick Ignition Interface | USB2Serial Adapter | TT-1 WB | Connectors & Terminals
What's Up Display | EBL Wiring | P4 What's Up Display | SFI-6 What's Up Display | EBL P4/SFI-6 Install Guide
 EBL P4 Wiring  | EBL SFI-6 Wiring | Injector Driving | TBI Fueling | Acronyms and Abbreviations | Re-Pinning | Setting Up & Using ADC Channels | Spark Plugs
Introduction to Tuning, Part 1 | Introduction to Tuning, Part 2
EBL Updates | Purchase | Contact Us

     
Copyright 2006-2016 Dynamic EFI, All Rights Reserved.
No part of this document may reproduced in any form or posted on a web site without expressed documented permission from Dynamic EFI